Iron-On Transfer Directions

Your iron-on transfer is printed and cut to order on premium TeckWrap printable heat transfer vinyl. You apply it at home with a household iron or a heat press. Directions also come with every order, and here's how to get a soft, bright, long-lasting result.

Please note: this is an iron-on transfer you apply yourself. It is not a DTF transfer or a DTG printed shirt, and no shirt is included. Your transfer is already printed and cut, so there's no mirroring, cutting, or weeding needed.

What You'll Need

  • Your iron-on transfer
  • A shirt or fabric item (cotton, polyester, or cotton/poly blends work best; avoid nylon and waterproof fabrics)
  • A household iron or a heat press
  • Parchment paper or a Teflon sheet
  • A hard, flat, heat-safe surface (not a padded ironing board, since it's too soft)

Before You Start

  • Wash and dry your shirt first without fabric softener, so the transfer sticks well.
  • Pre-press the shirt for 3-5 seconds to remove moisture and wrinkles.

How to Apply

  1. Peel the backing. Carefully peel the paper backing off the back of your transfer.
  2. Place it on your fabric. Lay the transfer image-side up exactly where you want it.
  3. Cover it. Lay parchment paper or a Teflon sheet over the top of the transfer. Never put the iron or press directly on the transfer.
  4. Press.
    • Heat press: 310-330°F with medium pressure for 15-20 seconds.
    • Household iron: cotton setting with steam off. Press straight down firmly for 10-20 seconds per section. Don't slide the iron back and forth. Lift and move to the next section, overlapping a little each time, until the whole design is covered. If your iron has steam holes, use small overlapping sections so no spots get missed. Pay extra attention to the edges.
  5. Let it cool. Let the transfer cool completely, then remove the parchment paper.
  6. Check the edges. If any edge is lifting, cover it again and press for about 10 more seconds.

Washing & Care

  • Wait at least 24-48 hours before the first wash.
  • Turn the shirt inside out and wash in cold or warm water on a gentle cycle.
  • Hang to dry or tumble dry on low. Avoid high heat.
  • No bleach, fabric softener, or dry cleaning.
  • Do not iron directly on the design. If needed, iron inside out or cover it with parchment paper.

Tips for the Best Results

  • Use Light Fabric transfers on white or light shirts, and Dark Fabric transfers on black or dark shirts.
  • Firm, even pressure matters more than extra heat. Too much heat can scorch the fabric or the transfer.
  • Test on a scrap of fabric first if you're unsure about your iron.

More Help

Ready to order? Shop Custom Iron-On Transfers. Still have questions? Contact us or email socutedecals@gmail.com. We want you to love every order!